HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Services Configuration G - Page 46
Specifying WINS servers and NetBIOS node type for the client
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Specifying WINS servers and NetBIOS node type for the client A Microsoft DHCP client using NetBIOS protocol must contact a WINS server for name resolution. You can specify up to eight WINS servers for such clients in a DHCP address pool. In addition, you must specify a NetBIOS node type for the clients to approach name resolution. There are four NetBIOS node types: • b (broadcast)-node-A b-node client sends the destination name in a broadcast message. The destination returns its IP address to the client after receiving the message. • p (peer-to-peer)-node-A p-node client sends the destination name in a unicast message to the WINS server and the WINS server returns the destination IP address. • m (mixed)-node-An m-node client broadcasts the destination name. If it receives no response, it unicasts the destination name to the WINS server to get the destination IP address. • h (hybrid)-node-An h-node client unicasts the destination name to the WINS server. If it receives no response, it broadcasts the destination name to get the destination IP address. To configure WINS servers and NetBIOS node type in a DHCP address pool: Step 1. Enter system view. 2. Enter DHCP address pool view. Command system-view dhcp server ip-pool pool-name 3. Specify WINS servers. nbns-list ip-address& 4. Specify the NetBIOS node netbios-type { b-node | h-node | type. m-node | p-node } Remarks N/A N/A This step is optional for b-node. By default, no WINS server is specified. By default, no NetBIOS node type is specified. Specifying BIMS server information for the client Perform this task to provide the BIMS server IP address, port number, and shared key for the clients. The DHCP clients contact the BIMS server to get configuration files and perform software upgrade and backup. To configure the BIMS server IP address, port number, and shared key in the DHCP address pool: Step Command 1. Enter system view. system-view 2. Enter DHCP address pool view. dhcp server ip-pool pool-name 3. Specify the BIMS server IP address, port number, and shared key. bims-server ip ip-address [ port port-number ] sharekey { cipher | simple } key Remarks N/A N/A By default, no BIMS server information is specified. 37