HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Services Configuration G - Page 45
Specifying a domain name suffix for the client, Specifying DNS servers for the client, gateway-list
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
The gateway-list command issued in DHCP address pool view specifies gateway addresses for all DHCP clients that obtain IP addresses from this address pool. To specify gateways for clients that obtain IP addresses from a secondary subnet, use the gateway-list command in secondary subnet view. If you specify gateways in both address pool view and secondary subnet view, DHCP preferentially assign the gateway addresses specified in the secondary subnet view to the clients on the secondary subnet. To configure gateways in the DHCP address pool: Step 1. Enter system view. 2. Enter DHCP address pool view. 3. Specify gateways. Command system-view dhcp server ip-pool pool-name gateway-list ip-address& Remarks N/A N/A By default, no gateway is specified. 4. (Optional.) Enter secondary subnet view network network-address [ mask-length | mask mask ] secondary N/A 5. (Optional.) Specify gateways. gateway-list ip-address& By default, no gateway is specified. Specifying a domain name suffix for the client You can specify a domain name suffix in a DHCP address pool on the DHCP server. With this suffix assigned, the client only needs to input part of a domain name, and the system adds the domain name suffix for name resolution. For more information about DNS, see "Configuring DNS." To configure a domain name suffix in the DHCP address pool: Step 1. Enter system view. 2. Enter DHCP address pool view. Command system-view dhcp server ip-pool pool-name 3. Specify a domain name suffix. domain-name domain-name Remarks N/A N/A By default, no domain name is specified. Specifying DNS servers for the client To access hosts on the Internet through domain names, a DHCP client must contact a DNS server to resolve names. You can specify up to eight DNS servers in a DHCP address pool. To specify DNS servers in a DHCP address pool: Step 1. Enter system view. 2. Enter DHCP address pool view. Command system-view dhcp server ip-pool pool-name 3. Specify DNS servers. dns-list ip-address& Remarks N/A N/A By default, no DNS server is specified. 36