HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Services Configuration G - Page 43
subnet and multiple secondary subnets in a DHCP address pool, which are consistent with the subnets
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
request, the DHCP server selects an address from the primary subnet. If no assignable address is found, the server selects an address from the secondary subnets in the order they are configured. In scenarios where the DHCP server and the DHCP clients reside on different subnets and the DHCP clients obtain IP addresses through a DHCP relay agent, the DHCP server needs to use the same address pool to assign IP addresses to clients in different subnets. To satisfy this need, you can specify a primary subnet and multiple secondary subnets in a DHCP address pool, which are consistent with the subnets where the relay agent interfaces reside. Upon receiving a DHCP request forwarded by a relay agent, the DHCP server reads the giaddr field in the request to find the corresponding subnet and selects an IP address for the client. Follow these guidelines when you specify a primary subnet and secondary subnets for a DHCP address pool: • You can specify only one primary subnet in each address pool. If you use the network command multiple times, the most recent configuration takes effect. • You can specify a maximum of 32 secondary subnets in each address pool. • IP addresses specified by the forbidden-ip command are not assignable in the current address pool, but are assignable in other address pools. IP addresses specified by the dhcp server forbidden-ip command are not assignable in any address pool. To specify a primary subnet and secondary subnets for a DHCP address pool: Step 1. Enter system view. 2. Enter address pool view. Command system-view dhcp server ip-pool pool-name Remarks N/A N/A 3. Specify the primary subnet. network network-address [ mask-length | mask mask ] By default, no primary subnet is specified. 4. (Optional.) Specify a secondary subnet. network network-address [ mask-length | mask mask ] secondary 5. (Optional.) Return to address pool view. quit By default, no secondary subnet is specified. N/A 6. (Optional.) Specify the address lease duration. expired { day day [ hour hour [ minute minute [ second second ] ] ] The default setting is one day. | unlimited } 7. (Optional.) Exclude the specified IP addresses from dynamic allocation. forbidden-ip ip-address& By default, all the IP addresses in the DHCP address pool can be dynamically allocated. To exclude multiple address ranges from the address pool, repeat this step. 8. Return to system view. quit N/A 34