HP 9085mfp HP 9085mfp - (English) System Administrator Guide - Page 100

Output Mode for Machine without Finisher This section describes the output modes for a mfp without the Finisher. The Non-sort mode is initially selected. 1 Non-sort mode copies the original set in amounts determined by the print quantity setting, then outputs sorted sets normally. 2 Rotation sort mode rotates every other sorted sets by 90° upon exit, provided the same paper size is loaded in two trays, one tray with paper loaded in portrait orientation and the other tray with paper loaded in landscape orientation, e.g., A4 and A4R. 3 Group mode copies each original page in amounts determined by the print quantity setting, then outputs grouped sets normally. 4 Rotation group mode rotates every other grouped set by 90° upon exit, provided the same paper size is loaded in two trays, one tray with paper loaded in portrait orientation and the other tray with paper loaded in landscape orientation, e.g., A4 and A4R. Using Face Up mode in combination with the above four modes, simplex copies and odd numbered duplex copies exit face up on the exit tray. 12 3 Originals Example: 3-set copies Face down non-sort (default) Face down rotation sort Face down group Face down rotation group Face up non-sort Face up rotation sort Face up group Face up rotation group 1. When using Rotation sort or Rotation group mode, load the same paper size into two trays in different orientation. HINT Non-sort mode is initially selected. Key Operator can change the initial output mode. See p. 13-10. 3-40