HP 9085mfp HP 9085mfp - (English) System Administrator Guide - Page 75
Selecting Magnification Ratio (Lens Mode), To Copy in 1.00 Magnification Mode
View all HP 9085mfp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Selecting Magnification Ratio (Lens Mode) When the mfp is turned ON, the magnification ratio is set to 1.00 (100%) automatically on the Basic Screen. Follow each procedure described in this section to select the desired magnification ratio. To Copy in 1.00 Magnification Mode Follow this procedure to make a 100% copy of the original image. 1. Close the RADF securely, then press [AUTO RESET]. 3 Copying Operations Positioning Originals Setting Print Quantity Set Job During Warmup Stop Scan/Print Paper Size Lens Mode The initial settings are restored. Check that APS is highlighted to indicate that the 1.00 magnification is selected. HINT The initial settings may be altered by the Key Operator. See p. 13-10 to p. 13-11. 2. Select additional copy conditions, as desired. DETAILS Specifying paper size will release 1.00 magnification and set AMS automatically. In this case, touch 1:1 to highlight it again. 3. Enter the desired print quantity from the control panel keypad. HINT See p. 3-7 for details on setting print quantity. 4. Position original(s). HINT See p. 3-2 to p. 3-6 for details on positioning originals. 5. Press [START]. Density 1-2, 2-2 2-1 Multi-Sheet Bypass Tray Using Memory Output without Finisher Q3219A/Q3220A Output Modes Binding Mode Recalling Previous Job Check Mode & Proof Copy Interrupt Mode 3-15