HP 9085mfp HP 9085mfp - (English) System Administrator Guide - Page 216

Programming Different Settings for an Output Job (Program Job) (continued) 4. Select the desired copy conditions. 5. Position originals FACE UP in the document feeder or FACE DOWN on the platen glass. If the number of document feeder originals exceeds 100, divide them into blocks not exceeding 100 sheets and load them from the block with the first page. 6. Press [START]. The paper size determined at this time will be applied to all subsequent JOBs. When scanning for the current JOB is completed, the popup menu will be displayed in the Basic Screen. 7. Touch CONFIRM. The current JOB images will be stored. To delete the images, touch CANCEL. 8. Repeat steps 4 to 7 until all JOB originals are scanned. Reminder! PLACE AND SCAN EACH ORIGINAL SET IN THE CORRECT ORDER OF PAGINATION. HINTS • Memory overflow may occur during scanning. See p. 5-11 to p. 5-12. • Should memory overflow occur frequently, it is recommended that you contact your service representative to extend the memory capacity in your machine. 9. Select the desired output mode and enter the print quantity from the control panel keypad. HINT See p. 3-7 for details on setting print quantity. 10. Touch STORE to exit the Store mode. 11. Press [START]. CAUTION When the finisher / paper exit tray capacity is exceeded due to the print quantity selected, remove the copied sets as they exit; otherwise, mishandled paper will occur. 9-26