HP 9085mfp HP 9085mfp - (English) System Administrator Guide - Page 114

Interrupt Copying (continued) DETAILS Remove any document from the platen glass or from the document feeder, if present. 3. Position original(s). HINT See p. 3-2 to p. 3-6 for details on positioning originals. 4. Press [START] to start the interrupt copying. DETAILS When [CHECK] is pressed during Interrupt copying, the information displayed reflects the initial copy job settings. Check mode will not display Interrupt copy job information. 5. When Interrupt copying is completed, press [INTERRUPT] again. The [INTERRUPT] LED turns out and the INTERRUPT indicator on the Basic Screen returns to the JOB indicators. The settings of the initial job will be restored on the Basic Screen. 6. Press [START] to resume copying. CAUTION When the finisher / trimmer unit / paper exit tray capacity is exceeded due to the print quantity selected, remove the copied sets as they exit; otherwise, mishandled paper will occur. DETAILS For particular jobs in progress, copying will cease only after certain phases of the immediate operation are completed, as indicated by the [INTERRUPT] LED conditions described below. • Collectively printing image stored in memory The LED blinks until one set of the current job is printed. Then the LED remains steady for the temporary job performed in Interrupt mode. • Scanning originals into memory The LED blinks until scanning is completed for all originals placed in the document feeder. Then, the LED remains steady for the temporary job performed in Interrupt mode. • Scanning originals into memory while printing in Reserve mode The LED blinks until the mfp completes the current printing job, scans all originals placed on the document feeder, and prints one set of the Reserved job. The LED remains steady for the temporary job performed in Interrupt mode. 3-54