HP 9085mfp HP 9085mfp - (English) System Administrator Guide - Page 333

[11] Tray Auto Select Setting Select to be detected or not to be detected, and priority of detection for each tray when ATS/APS functions. Key Operator Mode Screen 1 Key Operator Mode Screen 2 Tray Auto Select Setting Screen Procedure 1 Touch [11] Tray auto select setting on the Key Operator Mode Screen to display the Tray Auto Select Setting Screen. 2 On the left half of the screen, touch to highlight each tray key, then select OFF or ON to specify whether the selected tray is to be automatically detected or not when ATS/APS functions. 3 Tray keys specified as ATS/APS ON will appear on the right half of the screen. Touch to highlight the desired tray key, then change its priority by using Up (p) and Down (q) arrow keys. 4 Touch OK to complete the setting and restore the Key Operator Mode Screen. 5 If no further changes are required, touch PREVIOUS SCREEN to restore the Basic Screen to perform copying operations. Key Operator Mode System Initial Setting mfp Initial Setting User Setting Mode E.C.M. Lock/Delete Job Memory Paper Type/ Special Size Panel Contrast/ Key Sound Key Operator Data Setting Weekly Timer Control Panel Adjustment Tray Auto Select Setting Power Save Setting Memory Switch Machine Management List Print Call Remote Centre Side 2 Lens Adjustment Finisher Adjustment HDD Management Scan Transmission Non-Image Area Erase Timing Adjustment Centering Adjustment 13 Key Operator Mode 13-35