HP 9085mfp HP 9085mfp - (English) System Administrator Guide - Page 306
[2] mfp Initial Setting
View all HP 9085mfp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 306 highlights
[2] mfp Initial Setting Initial settings are the settings that display automatically when the mfp is powered on, when Auto/Reset timer is operated, or when [AUTO RESET] key is pressed. These settings can be changed by the Key Operator, as shown in this section. Initially (i.e., at installation), the Basic Screen displays the following conditions to meet Energy Star requirements: Initial Setting Copy Mode Copy Density Lens Mode Paper Tray Output Mode : 1-1 : AE : 1:1 : APS : offset sort When Initial settings are changed by the Key Operator, the new initial settings display when the mfp is powered on, when Auto/Reset timer is reached, or when [AUTO RESET] key is pressed. The following initial settings can be changed by the Key Operator: Copy mode : Copy density : Lens mode : Paper tray : Output mode : Special original : Rotation : [RADF; 1-1; 1-2; 2-2; 2-1] [AE; manual] [AMS; ratio 0.25~4.00] [APS; trays 1, 2, 3, HCI or optional tray 4] [Non-sort; Sort, Group; Staple-sort; Stitch&Fold; Fold; Punch; Trimming; Cover sheet] [Original Direction; Text/Photo Enhance; Special Original; Original Form] OFF Setting procedures are described on the following pages. NOTE: The most commonly-used settings are established at installation. Before changing any of the mfp settings, be sure that you understand the overall and long-range effect of the change. Key Operator Mode Screen mfp Initial Setting Screen 13-8