HP 9085mfp HP 9085mfp - (English) System Administrator Guide - Page 350
[20] Non-Image Area Erase Setting
View all HP 9085mfp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 350 highlights
[20] Non-Image Area Erase Setting Select the mode of Non-Image Area Erase function to be in effect when this feature is selected on the Application Selection Screen after power is turned on or after Auto Reset occurs. Key Operator Mode Screen Non-Image Area Erase Setting Screen Procedure 1 Touch [20] Non-image area erase setting on the Key Operator Mode Screen to display the Non-Image Area Erase Setting Screen. 2 Select the desired erase mode and original density level. Touch AUTO to let the machine select the erase mode and density level automatically. To specify the erase mode manually, touch Oblique erase or Rectangle erase, as desired, then select the density level required. Five exposure levels are provided. NOTE: Select AUTO mode if the specified Oblique or Rectangle Erase mode does not function properly due to the type of set original. 3 Touch OK to complete the setting and restore the Key Operator Mode Screen. 4 If no further changes are required, touch PREVIOUS SCREEN to restore the Basic Screen to perform copying operations. 13-52