HP 9085mfp HP 9085mfp - (English) System Administrator Guide - Page 80
Density Shift, Press any key from 0 to 5 using the keypad to determine the Density
View all HP 9085mfp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Selecting Density Level (continued) Density Shift Use this function to shift each of nine density levels to three levels lighter or three levels darker. This function can be set to use in combination with AUTO (Text/Photo), Text, Photo and Increase Contrast modes and the general mode. Density shift 0 Density shift 1 Density shift 2 Density shift 3 Density shift 4 Density shift 5 1. Touch SPECIAL ORIGINAL on the Basic Screen. The Special Original popup menu will be displayed. 2. Select the desired mode. (eg.) To set the Text mode, touch Text to highlight it. 3. Press [P (COUNTER)]. The following message will be displayed. Density Shift (Text) 2 (0 ~ 5) 4. Press any key (from 0 to 5) using the keypad to determine the Density shift. Entering 6 or above will be ignored. 5. Touch OK on the Special Original popup menu. Density shift in the selected enhance mode is determined. 3-20