HP 9085mfp HP 9085mfp - (English) System Administrator Guide - Page 173
Select the desired copying conditions on the primary mfp., Enter print quantity on the primary mfp
View all HP 9085mfp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
Using Two mfps in Tandem (continued) • Tandem printing job cannot be started if 10 reserve jobs (not in tandem mode) are entered on the secondary mfp. Wait until the reserve jobs are completed on the secondary mfp. • Selected tandem mode will be released automatically when the primary mfp activates Auto low power/Auto shut-off. Press [SLEEP ON/OFF] to release Auto shut-off if required, then select the tandem mode again to restart the procedure. 4. Select the desired copying conditions on the primary mfp. DETAILS Ordinary copying operation is still available on the secondary mfp during the tandem mode setting. 5. Enter print quantity on the primary mfp, using the keypad. When a print quantity amount of 100 is entered, the primary and secondary mfps will each copy and output 50 sheets. DETAILS • Print quantity must be set for [3] or more copies to activate the tandem mode. • When the print quantity entered is an odd number, the primary mfp will copy and output one sheet/set more than the secondary mfp to accommodate the job. 6. Position original(s) FACE UP in the document feeder or FACE DOWN on the platen glass of the primary mfp. HINT See p. 3-2 to p. 3-6 for details on positioning originals. 7. Press [START] on the control panel of the primary mfp. The Sub icon ( ) will display on the Basic Screen of the secondary mfp to indicate that the two mfps will start working in tandem. The tandem mode will be released automatically when tandem mode copying is completed, and the Master and Sub icons on each Basic Screen will disappear. Weekly Timer Rotation Vertical/Horizontal Zoom Fold / Stitch&Fold Punch Z-Fold Trimming Cover Sheet Feeding Using Finisher Manually Tandem Mode 7 Advanced Information DETAILS: Entering reserve job during Tandem mode copying If scanning of the next reserved job is performed during the tandem mode copying, that job will also be performed in the tandem mode. Up to 10 jobs including the present job can be reserved. Interrupt mode during Tandem mode copying Interrupt copying is available only on the mfp with [INTERRUPT] pressed. The tandem mode copying on the mfp in interrupt mode will be suspended until the interrupt copying is completed. If the interrupt mode period is of long standing, the Allocation recovery mode will activate to enable the other mfp to handle the remaining print quantity. 7-27