HP 9085mfp HP 9085mfp - (English) System Administrator Guide - Page 30
CAUTION: Q3219A/Q3220A Finisher Primary Main Tray
View all HP 9085mfp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Requirements for Safe Use (continued) CAUTION: Finisher Paper Exit Outlet To avoid injury when stapling large size copies, DO NOT put your hand into the open Paper Exit Outlet. CAUTION: Fixing Unit The internal fixing unit is very hot. To avoid getting burned, DO NOT TOUCH. Be careful when withdrawing the fixing unit. WARNING: Drum Unit The internal drum unit generates a high voltage. To avoid an electrical shock, DO NOT TOUCH. CAUTION: Disposal of mfp Do not dispose of this mfp yourself. Contact your service representative, who can arrange for its safe disposal. If you change the place of installation, please contact your service representative. CAUTION: Paper Capacity for the Exit Tray The exit tray capacity is max. 150 sheets. If a copy run of more than 150 is required, be sure to remove the copies from the exit tray before the maximum capacity is reached. Failure to do so will cause the mfp to jam. CAUTION: Q3219A/Q3220A Finisher Paper Capacity The Q3219A Finisher is equipped with two exit trays, and Q3220A Finisher is equipped with three exit trays. Select an exit tray and output mode on the Output Mode popup menu. To prevent paper misfeed, do not exceed the paper capacity of the Finisher. When the total number of copies in the copy run exceeds the capacity stated in Section 11, be sure to unload the exit tray while the mfp is still copying. Failure to do so will cause the mfp to jam. CAUTION: Q3219A/Q3220A Finisher Primary (Main) Tray When printed materials are removed from the primary (main) tray of the Finisher, the tray goes up automatically. To avoid injury, DO NOT put your hand on top of the printed sheets. Be sure to hold both sides of the printed sheets when removing them, and DO NOT leave your hand on the printed sheets while the primary tray goes up. 1-12