HP 9085mfp HP 9085mfp - (English) System Administrator Guide - Page 337

[13] Memory Switch Setting (continued) [3] RADF-Original effect Set the machine condition when original is set on RADF in non-RADF mode with RADF unit closed. [4] Job memory auto recall (30) Job memory No. 30 is automatically recalled when power is turned on or when Auto Reset is restored. This job recall function works only when Job No. 30 is registered. [5] Finisher mode by AUTO RESET Set the Finisher mode to be recalled when [AUTO RESET] is pressed. [6] Initial by Key counter insert Set the machine to return to the initial state when Key counter is inserted. [7] Erasure outside area of original Set the machine to delete the outside area of original. [8] RADF frame erasure selection Set Frame erasure to function anytime in RADF mode. [9] Automatic tray switching When paper is depleted during a copying job, the mfp continues copying by switching to another tray that contains the same size paper. [10] Platen APS The mfp automatically selects the same size copy paper as the original placed on the platen glass. (In reduction or enlargement mode, an appropriate paper size is selected according to the ratio selected.) [11] RADF APS The mfp automatically selects the same size copy paper as the original placed on the RADF. (In reduction/enlargement mode, an appropriate paper size is selected according to the ratio.) [12] Platen AMS The mfp detects the size of the platen original and selects the appropriate magnification ratio to correspond to the selected paper size. [13] RADF AMS After detecting the original size placed on the RADF the mfp automatically selects an appropriate ratio for the copy when paper size is selected manually. [14] Select tray when APS cancel Select the tray to be automatically selected when APS is released. [15] Platen original size detect Select the series of the original paper size detected from the platen glass. Key Operator Mode System Initial Setting mfp Initial Setting User Setting Mode E.C.M. Lock/Delete Job Memory Paper Type/ Special Size Panel Contrast/ Key Sound Key Operator Data Setting Weekly Timer Control Panel Adjustment Tray Auto Select Setting Power Save Setting Memory Switch Machine Management List Print Call Remote Centre Side 2 Lens Adjustment Finisher Adjustment HDD Management Scan Transmission Non-Image Area Erase Timing Adjustment Centering Adjustment 13 Key Operator Mode 13-39