HP 9085mfp HP 9085mfp - (English) System Administrator Guide - Page 47
Turning On the Power Switch, To Turn On the Power
View all HP 9085mfp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Turning On the Power Switch To Turn On the Power 1. Turn ON the power switch. The power switch is located on the left side of the engine. 2 Machine Information Machine Configuration Turn On/Off the Power Loading Paper HINT If the mfp can not be turned on by the power switch, open the left door of the engine, then check that the internal reset switch of the mfp is ON. (See p. 2-4.) Be sure not to use the reset switch in normal operation. 2. The Wake-up Screen and Warm-up Screens will be displayed. A few seconds after the Wake-up Screen appears in the LCD touch screen, seven types of Warm-up Screens will be displayed in succession for approx. 6.0 minutes. HINT You can set reserve jobs while the machine is warming up. Touch the LCD screen to change the Warm-up Screen to the Basic Screen, then check that the message "Ready to copy reserve" is displayed on the Basic Screen. See p. 3-8 to p. 3-9. 2-17