HP 9120 HP Officejet 9100 - User Guide - Page 119
Setting the automatic paper-type sensor, Configuring network options, Configuring the I/O timeout
UPC - 829160117782
View all HP 9120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
To set the ring and beep volumes z Embedded Web server (network connection) Open the embedded Web server and click the Settings tab. Click Maintenance in the left pane, click Device Settings tab, and use the Ring/Beep Volume option. z Control panel Press MENU, open the MAINTENANCE menu, and use the Ring and beep volume option. Setting the automatic paper-type sensor You can set the all-in-one to select the print settings that are appropriate for the media that is loaded. When you turn on this feature, the all-in-one detects the type of media (such as plain paper or transparencies) and automatically selects the media type and print quality that are most suitable for the job. To set the automatic paper-type sensor z Control panel Press MENU and open the PRINTER menu. Select the Configure tray option to open the TRAY submenu, and use the Automatic media type sense option. Configuring network options This section contains information about the following topics. z Configuring the I/O timeout z Configuring the network parameters Configuring the I/O timeout You can set the length of time that the all-in-one waits for remaining data for a print job. If that time is exceeded, the all-in-one prints the print job. To configure I/O timeout z Control panel Press MENU, open the NETWK & I/O menu, and use the I/O timeout option. ENWW Configuring the network parameters If the all-in-one is connected to a network with an HP Jetdirect print server, you can configure the following protocols for the all-in-one. See the HP Jetdirect Administrator's Guide on Starter CD 1 for more information about these options. Check the Configuration page for current settings (see Configuration page). z DLC/LLC z IPX/SPX z TCP/IP z AppleTalk Configuring network options 117