HP 9120 HP Officejet 9100 - User Guide - Page 90
Monitoring the dialing, Scheduling a fax, To schedule a fax
UPC - 829160117782
View all HP 9120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Monitoring the dialing In some phone systems, it might be important to be able to verify that you are dialing successfully. Normally, the all-in-one dials after you press START. At times, however, you might want the all-in-one to dial each number as you press it. For example, if you are charging your fax call to a calling card, you might need to dial the fax number, wait for the acceptance tone of the phone company, and then dial the calling card number. When dialing internationally, you might need to dial part of the number and then listen for dial tones before continuing to dial. You can monitor the dialing only for single fax numbers (that is, you cannot monitor the dialing for groups). To monitor the dialing See Sending a fax from the control panel if you need additional information about any of the steps. 1 Load the original on the scanner glass or in the ADF. 2 Type your PIN, if required. 3 Press FAX. 4 Set fax options. 5 Press START. The (off-hook) light turns on. 6 Begin dialing by using either the keypad or the keyboard. The all-in-one dials as you press each digit and a tone accompanies each key that you press. This allows you to wait for pauses, dial tones, international access tones, or calling card acceptance tones before continuing to dial. 7 Set fax options. Scheduling a fax You can schedule a black-and-white fax to be sent automatically at a future time to one or more recipients. When you complete this procedure, the all-in-one scans the document into memory and returns to the READY state so that you can perform other all-in-one tasks. You can schedule a fax only from the control panel. To schedule a fax Follow the basic steps under Sending a fax from the control panel (see those steps for details), but include the additional steps that are highlighted in bold. 1 Load the original. 2 Type your PIN, if required. 3 Press FAX. 4 Specify the fax number or group that is to receive the fax. 5 Set fax options. 6 Press - or + to select Send Non-realtime, and then press (select). 88 8 - Faxing ENWW