HP 9120 HP Officejet 9100 - User Guide - Page 30
To verify that the keyboard is installed correctly
UPC - 829160117782
View all HP 9120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
5 Close the print-carriage access door. 6 Press and release the front of the keyboard tray to open the tray. 7 If there is a cover over the keyboard tray, remove the cover by pressing the two release latches on the underside of the tray. 8 Insert the back edge of the keyboard into the tray, and then press the keyboard down until it snaps into place. 9 Plug the power cord in and press (POWER) to turn on the all-in-one. To verify that the keyboard is installed correctly 1 Make sure that the power cord is plugged in and that the power is turned on. 2 Make sure that READY appears on the control-panel display. If an error message appears, the keyboard might have been installed incorrectly. 3 Print a Configuration page (see Configuration page). If the keyboard is not listed, one of the following problems might have occurred: 28 2 - Installing accessories ENWW