HP 9120 HP Officejet 9100 - User Guide - Page 40
Loading an original on the scanner glass, To load a document on the scanner glass
UPC - 829160117782
View all HP 9120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Note Loading an original on the scanner glass You can copy or scan any original by placing it on the scanner glass. Some all-in-one options will not work correctly if the scanner glass an ADF lid backing are not clean. See Cleaning the all-in-one for more information. To load a document on the scanner glass 1 Make sure that no originals are loaded in the ADF. 2 Lift the ADF. 3 Place the original face-down on the scanner glass in the corner shown in the following illustration. The sides of the original should touch the right and front edges. It is important to place the original as shown. Otherwise, part of the original might be clipped in the resulting scan. Note CAUTION If you are copying from a transparency (that is, your original is printed on transparency film), place a blank piece of paper between the transparency and the flatbed scanner lid. 4 Close the ADF. To prevent damaging the all-in-one, do not allow the scanner lid to fall onto the flatbed scanner surface. Always close the ADF when the all-in-one is not in use. 38 3 - Using the all-in-one ENWW