HP EX475 HP EX470, EX475 MediaSmart Server - User's Guide - Page 117
Power-on indicator is off, Why is the hard drive light-bar purple?, Why is the hard drive light-bar
UPC - 883585222643
View all HP EX475 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
The shutdown process may take up to two minutes to complete. 3 After the server is completely off, press the Power button to restart. To force a shutdown and restart 1 On the back of the server, hold in the Power button for at least 4 seconds to force the server to shutdown. 2 After the server is completely off, press the Power button to restart. Power-on indicator is off The server is not powered on. To power on the server 1 Make sure the power cord is fully plugged into the server and a powered electrical outlet. 2 If plugged into a surge protector or power strip, make sure the device is switched on. Why is the hard drive light-bar purple? A purple light bar indicates that a hard drive has been installed, but has not been initialized. It occurs in the following conditions: • When setting up the server for first time-the light-bar is purple until the set up on the first computer is complete. • The drive has been removed from total storage-for example, when removing a drive from the drive bay. See Removing a hard drive from the server on page 6-12. • When adding a new drive, before is has been added to server storage. For information on initializing a hard drive, see Server Storage in the Windows Home Server Console Help. Why is the hard drive light-bar red? A red light-bar indicates the following: • That a hard drive has failed and must be replaced. Additionally, the connected computers show the following: Troubleshooting 7-3