HP EX475 HP EX470, EX475 MediaSmart Server - User's Guide - Page 16
Turning on the HP MediaSmart Server - no power
UPC - 883585222643
View all HP EX475 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Turning on the HP MediaSmart Server Connect the HP MediaSmart Server to a power source and to a router. Figure 2: Connecting to power and powering on To power on the server 1 Plug in. Plug one end of the power cord into the server's power receptacle and the other end into an electrical outlet. 2 Connect. Connect one end of the Ethernet cable to the server and the other end to an available Ethernet port on your router or to a switch that is connected to your router. 3 Power on. Press the Power button on the back of the server. The server takes approximately 60 seconds to startup. The indicator lights blink and change color throughout the startup process. Wait for all of the server lights to be solid before proceeding with the software installation. Important: Do not attach USB devices to the HP MediaSmart Server during initial setup. For additional information, see the Troubleshooting on page 7-1. 1-6 Installing Version Update 1.1.1