HP LH4r HP NetRAID-4M Installation Guide - Page 43
Installing the Drivers When Windows 2000 is Already Installed
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Installing the Device Drivers 8 You will be shown a list with one item on it; press Enter to select the drivers - HP NetRAID-4M RAID CONTROLLER. 9 If you have no other drivers that you need to install, press Enter to continue with the installation. Follow the instructions onscreen and in the Windows 2000 documentation to complete the installation. 10 When the installation completes, the Found New Hardware wizard automatically runs. Ensure that the NOS Drivers Windows 2000 Disk #1 is inserted in the floppy drive, and then make the necessary selection to install the Windows 2000 drivers from the diskette. 11 To load the Windows 2000 drivers, remove the HP NetRAID- 4M RAID CONTROLLER Windows 2000 Drivers diskette from the floppy drive and reboot the system. Installing the Drivers When Windows 2000 is Already Installed To install the drivers when Windows 2000 is already installed on your system, follow these steps: 1 Ensure that the HP NetRAID-4M controller is installed in your system, then reboot your system so that the system can recognize the controller. When the system is rebooted and the controller recognized, Windows 2000 automatically launches the Found New Hardware wizard, which you use to install the Windows 2000 drivers for the HP NetRAID-4M controller. 2 The Found New Hardware wizard displays a Files Needed dialog box, which prompts for the location on the A drive for the driver files for the HP NetRAID-4M controller. Insert the diskette labeled NOS Drivers - Windows 2000 Disk #1 in the A drive and click OK. The system then installs the driver. 3 When the driver finishes installing, click Finish to exit the Found New Hardware wizard. 4 At the message Do you want to restart the computer now?, remove the diskette from the floppy drive and click Yes to reboot the system. 4-9