HP LH4r HP NetRAID-4M Installation Guide - Page 80
Moving Quorum to a Shared Container, Removing the HPNetRAID-4M Cluster Software
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Hewlett-Packard NetRAID-4M Controller Installation Guide 2 When prompted, choose Join an existing cluster, then specify the cluster name you created when installing MSCS on the first node. 3 Install the HP NetRAID-4M Cluster software following the same procedure as described for the first node. 4 If the cluster nodes are running Windows NT, reinstall the service pack on each node. If you originally installed Service Pack 3 (which is integrated with Windows NT Enterprise Server V4.0), you should upgrade to Service Pack 6A at this time. Moving Quorum to a Shared Container When you installed Microsoft Cluster Service (MSCS), you might have established a temporary local quorum; if so, you should now move the local quorum to a container on a shared channel, as follows: 1 Use FAST or the CLI to create a new diskset and a single container on that diskset. For optimal reliability and performance, a RAID-5 set is strongly recommended. 2 To ensure that the drive letter for the shared container is permanently assigned on both nodes, move the newly created diskset to the second node and manually assign the same drive letter to the shared container on the second node. 3 Use the MSCS Cluster Administrator to create a diskset resource corresponding to the newly created diskset, and move quorum to this diskset resource. For information on creating a diskset, container, and diskset resource, see the Flexible Array Storage Tool User's Guide. ! Caution: When assigning quorum, do not use a mirror set or stripe set of mirror sets (RAID 0/1) as the quorum device Removing the HP NetRAID-4M Cluster Software To remove the HP NetRAID-4M Cluster software from your system, you must be logged on as an administrator or have administrative privileges. 7-6