HP Neoware e90 NeoLinux Thin Clients User Manual - Page 23
Configuring Your Network Settings, Selecting the network settings, Do you need
View all HP Neoware e90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
NeoLinux User Manual CHAPTER 2 Configuring Your Network Settings This chapter describes how to initially configure your thin client for your network. Selecting the network settings Do you need to configure? FYI DHCP and BOOTP automatically supply the IP address and other setting for your appliance when it starts up. Accessing network settings Your thin client must be assigned a unique Internet Protocol (IP) address in order to communicate on your network. Your network may also require other settings. If your network uses a remote configuration service such as the Dynamic Host Configuration Protocol (DHCP) or the Bootstrap Protocol (BOOTP), the thin client will configure itself. In that case, all you do is turn on the thin client. Your network or system administrator will tell you if your network uses DHCP or BOOTP (in which case you may not need to configure network settings) or if you need to manually enter network settings. To configure your thin client's network settings, select Settings | Appliance Properties | Network from the ezConnect (Neoware Connection Manager) menu bar or press the F2 key. Click here to set your thin client network properties 23