Netgear XSM4348CS CLI Manual Software Version 12.x - Page 1015
show ip mroute, detail, summary
View all Netgear XSM4348CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1015 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Format Modes show ip mcast interface {unit/slot/port | vlan vlan-id} Privileged EXEC User EXEC Term Interface TTL Definition unit/slot/port The time-to-live value for this interface. show ip mroute This command displays a summary or all the details of the multicast table. Format Modes show ip mroute {detail | summary} Privileged EXEC User EXEC If you use the detail parameter, the command displays the following fields. Term Source IP Addr Group IP Addr Expiry Time Up Time RPF Neighbor Flags Definition The IP address of the multicast data source. The IP address of the destination of the multicast packet. The time of expiry of this entry in seconds. The time elapsed since the entry was created in seconds. The IP address of the RPF neighbor. The flags associated with this entry. If you use the summary parameter, the command displays the following fields. Term Definition Source IP Addr The IP address of the multicast data source. Group IP Addr The IP address of the destination of the multicast packet. Protocol The multicast routing protocol by which the entry was created. Incoming Interface The interface on which the packet for the source/group arrives. Outgoing Interface The list of outgoing interfaces on which the packet List is forwarded. IP Multicast Commands 1015 CLI Command Reference Manual