Netgear XSM4348CS CLI Manual Software Version 12.x - Page 321
show power redundancy, show power, console and in the logging buffer
![]() |
View all Netgear XSM4348CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 321 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches The unit-number argument specifies the PSU in the switch. Default Format Mode Disabled power redundancy [unit-number] Global Config Note: If the total available power minus the total consumed power is less than what one PSU can supply, the switch does not enable the N+1 feature. Instead, it generates the following error message on the console and in the logging buffer: Not enough power to enable N+1 feature. Total available power: . Total consumption power: no power redundancy This command disables the N+1 power redundancy feature. Format Mode no power redundancy Global Config show power redundancy This command displays the power redundancy status. Format Mode show power redundancy Privileged EXEC Command example: (NETGEAR Switch)# show power redundancy N+1 configuration Disable N+1 Active No Number of PSU 1 Effective Number of PSU 1 show power This command displays the switch power usage. The unit-number argument specifies the PSU in the switch. Format Mode show power [unit-number] Privileged EXEC Utility Commands 321 CLI Command Reference Manual
![](/manual_guide/products/netgear-m43008x8f-cli-manual-software-version-12x-6ae8ad6/321.png)