Netgear XSM4348CS CLI Manual Software Version 12.x - Page 758
The following OSPF NSSA specific information displays only if the area is con d as an, NSSA.
View all Netgear XSM4348CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 758 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Term Definition Import Summary Shows whether to import summary LSAs. LSAs OSPF Stub Metric The metric value of the stub area. This field displays only if the area is a configured as a stub area. Value The following OSPF NSSA specific information displays only if the area is configured as an NSSA. Term Definition Import Summary Shows whether to import summary LSAs into the NSSA. LSAs Redistribute into NSSA Shows whether to redistribute information into the NSSA. Default Information Shows whether to advertise a default route into the NSSA. Originate Default Metric The metric value for the default route advertised into the NSSA. Default Metric Type The metric type for the default route advertised into the NSSA. Translator Role The NSSA translator role of the ABR, which is always or candidate. Translator Stability The amount of time that an elected translator continues to perform its duties after it determines that Interval its translator status has been deposed by another router. Translator State Shows whether the ABR translator state is disabled, always, or elected. Command example: (R1) #show ip ospf area 1 AreaID 0.0.0.1 External Routing Import External LSAs Spf Runs 10 Area Border Router Count 0 Area LSA Count 3004 Area LSA Checksum 0x5e0abed Flood List Length 0 Import Summary LSAs Enable Routing Commands 758 CLI Command Reference Manual