Netgear XSM4348CS CLI Manual Software Version 12.x - Page 548
ip arp inspection validate
View all Netgear XSM4348CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 548 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches no ip arp inspection vlan Use this command to disable Dynamic ARP Inspection on a list of comma-separated VLAN ranges. Format Mode no ip arp inspection vlan vlan-list Global Config ip arp inspection validate Use this command to enable additional validation checks like source-mac (src-mac) validation, destination-mac (dst-mac) validation, and IP address validation on the received ARP packets. Each command overrides the configuration of the previous command. For example, if a command enables source-mac and destination-mac validations, and a second command enables IP validation only, the source-mac and destination-mac validations are disabled as a result of the second command. Default Format Mode Disabled ip arp inspection validate {[src-mac] [dst-mac] [ip]} Global Config no ip arp inspection validate Use this command to disable the additional validation checks on the received ARP packets. Format Mode no ip arp inspection validate {[src-mac] [dst-mac] [ip]} Global Config ip arp inspection vlan logging Use this command to enable logging of invalid ARP packets on a list of comma-separated VLAN ranges. Default Format Mode Enabled ip arp inspection vlan vlan-list logging Global Config no ip arp inspection vlan logging Use this command to disable logging of invalid ARP packets on a list of comma-separated VLAN ranges. Format Mode no ip arp inspection vlan vlan-list logging Global Config Switching Commands 548 CLI Command Reference Manual