Netgear XSM4348CS CLI Manual Software Version 12.x - Page 309
exception dump ftp-server, no exception protocol
![]() |
View all Netgear XSM4348CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 309 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches no exception protocol Use this command to reset the exception protocol configuration to its factory default value. Format Mode no exception protocol Global Config exception dump ftp-server Use this command to configure the IP address of a remote FTP server as an external server to which you can dump core files. If you do not specify the user name and password, the switch uses anonymous FTP. (The FTP server must be configured to accept anonymous FTP.) Default Format Mode None exception dump ftp-server ip-address [{username user-name password password}] Global Config no exception dump ftp-server This command resets the remote FTP server configuration that is used for exception dumps to the default value (which is none). This command also resets the FTP user name and password to empty strings. Format Mode exception dump ftp-server Global Config exception dump tftp-server Use this command to configure the IP address of a remote TFTP server in order to dump core files to an external server. Default Format Mode None exception dump tftp-server {ip-address} Global Config no exception dump tftp-server Use this command to reset the exception dump remote server configuration to its factory default value. Format Mode no exception dump tftp-server Global Config Utility Commands 309 CLI Command Reference Manual
![](/manual_guide/products/netgear-m43008x8f-cli-manual-software-version-12x-6ae8ad6/309.png)