Netgear XSM4348CS CLI Manual Software Version 12.x - Page 893
This command displays the statistics for a specific interface. The command displays
View all Netgear XSM4348CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 893 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Term Router Priority Metric Cost Hello Interval Dead Interval Retransmit Interval Retransmit Delay Interval LSA Ack Interval Definition The router priority. The router priority determines which router is the designated router. The priority of the path. Low costs have a higher priority than high costs. The frequency, in seconds, at which the interface sends Hello packets. The amount of time, in seconds, the interface waits before assuming a neighbor is down. The frequency, in seconds, at which the interface sends LSA. The number of seconds the interface adds to the age of LSA packets before transmission. The amount of time, in seconds, the interface waits before sending an LSA acknowledgement after receiving an LSA. show ipv6 ospf interface stats This command displays the statistics for a specific interface. The command displays information only if OSPF is enabled. Format Modes show ipv6 ospf interface stats unit/slot/port Privileged EXEC User EXEC Term OSPFv3 Area ID IP Address OSPFv3 Interface Events Virtual Events Neighbor Events Packets Received Packets Transmitted LSAs Sent LSA Acks Received LSA Acks Sent Sent Packets Received Packets Discards Definition The area id of this OSPF interface. The IP address associated with this OSPF interface. The number of times the specified OSPF interface has changed its state, or an error has occurred. The number of state changes or errors that occurred on this virtual link. The number of times this neighbor relationship has changed state, or an error has occurred. The number of OSPFv3 packets received on the interface. The number of OSPFv3 packets sent on the interface. The total number of LSAs flooded on the interface. The total number of LSA acknowledged from this interface. The total number of LSAs acknowledged to this interface. The number of OSPF packets transmitted on the interface. The number of valid OSPF packets received on the interface. The number of received OSPF packets discarded because of an error in the packet or an error in processing the packet. IPv6 Commands 893 CLI Command Reference Manual