Netgear XSM4348CS CLI Manual Software Version 12.x - Page 478

M4300 Intelligent Edge Series Fully Managed Stackable Switches dot1x supplicant max-start This command configures the number of attempts that the supplicant makes to find the authenticator before the supplicant assumes that there is no authenticator. The number of attempts can be in a range from 1-10. The default is 3 attempts. Default Format Mode 3 dot1x supplicant max-start number Interface Config no dot1x supplicant max-start This command sets the max-start value to the default. Format Mode no dot1x supplicant max-start Interface Config dot1x supplicant timeout start-period This command configures the start period timer interval to wait for the EAP identity request from the authenticator. The interval can be in a range from 1-65535 seconds. The default is 30 seconds. Default Format Mode 30 seconds dot1x supplicant timeout start-period seconds Interface Config no dot1x supplicant timeout start-period This command sets the start-period value to the default. Format Mode no dot1x supplicant timeout start-period Interface Config dot1x supplicant timeout held-period This command configures the held period timer interval to wait for the next authentication on previous authentication fail. The interval can be in a range from 1-65535 seconds. The default is 30 seconds. Default Format Mode 60 seconds dot1x supplicant timeout held-period seconds Interface Config Switching Commands 478 CLI Command Reference Manual