Netgear XSM4348CS CLI Manual Software Version 12.x - Page 964

M4300 Intelligent Edge Series Fully Managed Stackable Switches Term Rule Status ACL Hit Count Definition Status (Active/Inactive) of the MAC ACL rule. The number of packets that match a configured ACL rule within an ACL (referred to as ACL hit count). The counter resets to 0 when the maximum value is reached. A dedicated counter exists for each ACL rule. ACL counters do not interact with PBR counters. For an ACL with multiple rules, if a match occurs for a specific rule, the counter that is associated with this rule increments. For example, if an ACL includes three rules, when a match occurs for rule 2, the counter for rule 3 does not increment. For ACL counters, if an ACL rule is configured without a rate limit condition, the counter shows the number of forwarded or discarded packets. (For example, for a burst of 100 packets, the counter shows 100.) If the ACL rule is configured with a rate limit condition, the counter shows the number of packets that match the condition: • If the packets are sent at a rate that is lower than the configured rate limit, the counter displays the number of packets that match the condition. • If the packets are sent at a rate that exceeds the configured rate limit, the counter still displays the number of packets that match the condition, even though packets are dropped beyond the configured limit. In this situation, the number of packets that match the condition equals the rate at which the packets are sent. For example, if the rate limit condition is 10 kbps but the matching traffic is sent at 100 kbps, the counter increments with 100 kbps. Either way, only the number of packets that match the condition is reflected in the counter, irrespective of whether they are dropped or forwarded. ACL counters do not interact with diffserv policies. (NETGEAR Switch) #show mac access-lists mac1 ACL Name: mac1 Outbound Interface(s): control-plane Sequence Number: 10 Action permit Source MAC Address 00:00:00:00:AA:BB Source MAC Mask FF:FF:FF:FF:00:00 Committed Rate 32 Committed Burst Size 16 ACL hit count 0 Sequence Number: 25 Action permit Source MAC Address 00:00:00:00:AA:BB Source MAC Mask FF:FF:FF:FF:00:00 Destination MAC Address...........01:80:C2:00:00:00 Destination MAC Mask 00:00:00:FF:FF:FF Ethertype ipv6 VLAN 36 CoS Value 7 Assign Queue 4 Quality of Service Commands 964 CLI Command Reference Manual