Netgear XSM4348CS CLI Manual Software Version 12.x - Page 111

M4300 Intelligent Edge Series Fully Managed Stackable Switches no login authentication Use this command to return to the default specified by the authentication login command. Format Mode no login authentication {default | list-name} Line Configuration password (Line Configuration) Use the password command in Line Configuration mode to specify a password on a line. The default configuration is no password is specified. Format Mode password [password [encrypted]] Line Config Parameter password encrypted Definition Password for this level. Range: 8-64 characters Encrypted password to be entered, copied from another switch configuration. The encrypted password should be 128 characters long because the assumption is that this password is already encrypted with AES. Command example: The following example specifies a password mcmxxyyy on a line. (NETGEAR Switch)(config-line)# password mcmxxyyy Command example: (NETGEAR Switch)(Config-line)# password testtest (NETGEAR Switch) (Config-line)# password e8d63677741431114f9e39a853a15e8fd35ad059e2e1b49816c243d7e08152b052eafbf23b528d348cdba1b 1b7ab91be842278e5e970dbfc62d16dcd13c0b864 encrypted (NETGEAR Switch) (Config-line)# password Enter new password:******** Confirm new password:******** no password (Line Configuration) Use this command to remove the password on a line. Format Mode no password Line Config Management Commands 111 CLI Command Reference Manual