Netgear XSM4348CS CLI Manual Software Version 12.x - Page 348

M4300 Intelligent Edge Series Fully Managed Stackable Switches no rmon collection history This command will delete the history control group entry with the specified index number. Format Mode no rmon collection history index-number Interface Config Command example: (NETGEAR Switch) (Interface 1/0/1-1/0/10)# no rmon collection history 1 show rmon This command displays the entries in the RMON alarm table. Format Mode show rmon {alarms | alarm alarm-index} Privileged Exec Term Description Alarm Index An index that uniquely identifies an entry in the alarm table. Each entry defines a diagnostic sample at a particular interval for an object on the device. The range is 1 to 65535. Alarm Variable The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of integer. Alarm Interval The interval in seconds over which the data is sampled and compared with the rising and falling thresholds. The range is 1 to 2147483647. The default is 1. Alarm Absolute Value The value of the statistic during the last sampling period. This object is a read-only, 32-bit signed value. Alarm Rising Threshold The rising threshold for the sample statistics. The range is 2147483648 to 2147483647. The default is 1. Alarm Rising Event The index of the eventEntry that is used when a rising threshold is crossed. The range is 1 to 65535. Index The default is 1. Alarm Falling Threshold The falling threshold for the sample statistics. The range is 2147483648 to 2147483647. The default is 1. Alarm Falling Event The index of the eventEntry that is used when a falling threshold is crossed. The range is 1 to 65535. Index The default is 2. Alarm Startup Alarm The alarm that may be sent. Possible values are rising, falling or both rising-falling. The default is rising-falling. Alarm Owner The owner string associated with the alarm entry. The default is monitorAlarm. Utility Commands 348 CLI Command Reference Manual