Netgear XSM4348CS CLI Manual Software Version 12.x - Page 1019
DVMRP Commands
![]() |
View all Netgear XSM4348CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1019 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Parameter Description group-address IP address of the multicast group. source-address The optional IP address of a multicast source that is sending multicast traffic to the group. Command example: The following example deletes all entries from the IP multicast routing table: (NETGEAR Switch) # clear ip mroute * Command example: The following example deletes all entries from the IP multicast routing table that match the multicast group address (224.1.2.1), irrespective of which source is sending for this group: (NETGEAR Switch) # clear ip mroute 224.1.2.1 Command example: The following example deletes all entries from the IP multicast routing table that match the multicast group address (224.1.2.1) and the multicast source address (192.168.10.10): (NETGEAR Switch) # clear ip mroute 224.1.2.1 192.168.10.10 DVMRP Commands This section describes the Distance Vector Multicast Routing Protocol (DVMRP) commands. ip dvmrp (Global Config) This command sets administrative mode of DVMRP in the router to active. Default Format Mode disabled ip dvmrp Global Config no ip dvmrp This command sets administrative mode of DVMRP in the router to inactive. Format Mode no ip dvmrp Global Config IP Multicast Commands 1019 CLI Command Reference Manual
![](/manual_guide/products/netgear-m43008x8f-cli-manual-software-version-12x-6ae8ad6/1019.png)