Netgear XSM4348CS CLI Manual Software Version 12.x - Page 39
show supported switchtype for stack configuration
View all Netgear XSM4348CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Command example: (Netgear Switch) #show switch 1 Switch 1 Management Status Management Switch Hardware Management Preference.... Unassigned Admin Management Preference....... Unassigned Switch Type 0xd6064004 Preconfigured Model Identifier.... M4300-52G-PoE+ Plugged-in Model Identifier....... M4300-52G-PoE+ Switch Status OK Switch Description M4300-52G-PoE+ ProSafe 48-port Copper 1G PoE+ L3 Switch with 2-port 10G Copper and 2-port 10G Fiber Detected Code in Flash 12.0.0.2 CPLD version 0x1 SFS Last Attempt Status........... None Serial Number 4G115B5UF0026 Up Time 2 days 3 hrs 24 mins 33 secs show supported switchtype (for stack configuration) Use this command to display information about all supported switch types or about a specific switch type. Format Modes show supported switchtype [switchindex] User EXEC Privileged EXEC If you do not supply a value for switchindex, the following output displays: Term Definition Switch Index (SID) The index in the database of supported switch types. This index is used when you preconfigure a member to be added to the stack. Model Identifier The model identifier for the supported switch type. Management Preference The management preference value of the switch type. Code Version The firmware load target identifier of the switch type. If you supply a value for switchindex, the following output displays: Term Switch Type Definition The 32-bit numeric switch type for the supported switch. Stacking Commands 39 CLI Command Reference Manual