Netgear XSM4348CS CLI Manual Software Version 12.x - Page 249

M4300 Intelligent Edge Series Fully Managed Stackable Switches Source url url url url url url url url url url url {image1 | image2} {image1 | image2} {image1 | image2} Destination Description nvram:script destfilename noval When you use this option, the copy command does not validate the downloaded script file. An example of the CLI command follows: (NETGEAR Switch) #copy tftp://1.1.1.1/file.scr nvram:script file.scr noval nvram:sshkey-dsa Downloads an SSH key file. For more information, see Secure Shell Commands on page 77. nvram:sshkey-rsa2 Downloads an SSH key file. nvram:sslpem-dhweak Downloads an HTTP secure-server certificate. nvram:sslpem-dhstrong Downloads an HTTP secure-server certificate. nvram:sslpem-root Downloads an HTTP secure-server certificate. For more information, see Hypertext Transfer Protocol Commands on page 85. nvram:sslpem-server Downloads an HTTP secure-server certificate. nvram:startup-config Downloads the startup configuration file to the system. ias-users Downloads an IAS users database file to the system. When the IAS users file is downloaded, the switch IAS user's database is replaced with the users and their attributes available in the downloaded file. {image1 | image2} Download an image from the remote server to either image. The downloaded image is distributed to the stack members. nvram:tech-support-cmds Download the tech-support-cmds file to the switch. You can prepare a list of commands in this file. The tech-support infrastructure reads this file and displays the output of these additional commands if you issue the show tech-support command. This method is not supported under a subtree command such as the show tech-suport dot3ad command and the show tech-support ospf command. url Upload either image to the remote server. unit://unit/{image1 | image2} Copy an image from the master to a specific member in a stack. Use the unit parameter to specify the member to which the image must be copied. unit://*/{image1 | image2} Copy an image from the master to all of members in a stack. Utility Commands 249 CLI Command Reference Manual