Netgear XSM4348CS CLI Manual Software Version 12.x - Page 679

M4300 Intelligent Edge Series Fully Managed Stackable Switches Term Definition ECMP Groups (High) The number of next hop groups with multiple next hops. The value in parentheses indicates the highest count of next hop groups since counters were last cleared. ECMP Groups The number of next hop groups with multiple next hops. ECMP Routes The number of routes with multiple next hops currently in the routing table. Truncated ECMP Routes The number of ECMP routes that are currently installed in the forwarding table with just one next hop. The forwarding table may limit the number of ECMP routes or the number of ECMP groups. When an ECMP route cannot be installed because such a limit is reached, the route is installed with a single next hop. ECMP Retries The number of ECMP routes that have been installed in the forwarding table after initially being installed with a single next hop. Routes with n Next The current number of routes with each number of next hops. Hops Command example: (NETGEAR Switch) #show ip route summary Connected Routes 7 Static Routes 1 RIP Routes 20 BGP Routes 10 External 0 Internal 10 Local 0 OSPF Routes 1004 Intra Area Routes 4 Inter Area Routes 1000 External Type-1 Routes 0 External Type-2 Routes 0 Reject Routes 0 Total routes 1032 Best Routes (High 1032 (1032) Alternate Routes 0 Route Adds 1010 Route Modifies 1 Route Deletes 10 Unresolved Route Adds 0 Invalid Route Adds 0 Failed Route Adds 0 Reserved Locals 0 Unique Next Hops (High 13 (13) Next Hop Groups (High 13 (14) ECMP Groups (High 2 (3) Routing Commands 679 CLI Command Reference Manual