Netgear XSM4348CS CLI Manual Software Version 12.x - Page 900

M4300 Intelligent Edge Series Fully Managed Stackable Switches Term Area ID Type of Service Metric Val Import Summary LSA Definition A 32-bit identifier for the created stub area. Type of service associated with the stub metric. For this release, Normal TOS is the only supported type. The metric value is applied based on the TOS. It defaults to the least metric of the type of service among the interfaces to other areas. The OSPF cost for a route is a function of the metric value. Controls the import of summary LSAs into stub areas. show ipv6 ospf virtual-link This command displays the OSPF Virtual Interface information for a specific area and neighbor. The area-id parameter identifies the area and the neighbor parameter identifies the neighbor's Router ID. Format Modes show ipv6 ospf virtual-link area-id neighbor Privileged EXEC User EXEC Term Area ID Neighbor Router ID Hello Interval Dead Interval Interface Transmit Delay Retransmit Interval Authentication Type State Neighbor State Definition The area id of the requested OSPF area. The input neighbor Router ID. The configured hello interval for the OSPF virtual interface. The configured dead interval for the OSPF virtual interface. The configured transmit delay for the OSPF virtual interface. The configured retransmit interval for the OSPF virtual interface. The type of authentication the interface performs on LSAs it receives. The OSPF Interface States are: down, loopback, waiting, point-to-point, designated router, and backup designated router. This is the state of the OSPF interface. The neighbor state. show ipv6 ospf virtual-link brief This command displays the OSPFV3 Virtual Interface information for all areas in the system. Format Modes show ipv6 ospf virtual-link brief Privileged EXEC User EXEC IPv6 Commands 900 CLI Command Reference Manual