Netgear XSM4348CS CLI Manual Software Version 12.x - Page 584
set mld mcrtexpiretime
![]() |
View all Netgear XSM4348CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 584 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches switch will wait after sending a query on an interface because it did not receive a report for a particular group in that interface. This value must be less than the MLD query interval time value. The range is 1 to 65 seconds. Default Format Mode 10 seconds set mld maxresponse seconds Global Config Interface Config VLAN Mode no set mld maxresponse Use this command to set the max response time (on the interface or VLAN) to the default value. Format Mode no set mld maxresponse Global Config Interface Config VLAN Mode set mld mcrtexpiretime Use this command to set the multicast router present expiration time. The time is set for the system, on a particular interface or VLAN. This is the amount of time in seconds that a switch waits for a query to be received on an interface before the interface is removed from the list of interfaces with multicast routers attached. The range is 0 to 3600 seconds. A value of 0 indicates an infinite time-out, that is, no expiration. Default Format Mode 0 set mld mcrtexpiretime vlan-id seconds Global Config Interface Config no set mld mcrtexpiretime Use this command to set the multicast router present expiration time to 0. The time is set for the system, on a particular interface or a VLAN. Format Mode no set mld mcrtexpiretime vlan-id Global Config Interface Config Switching Commands 584 CLI Command Reference Manual
![](/manual_guide/products/netgear-m43008x8f-cli-manual-software-version-12x-6ae8ad6/584.png)