Netgear XSM4348CS CLI Manual Software Version 12.x - Page 127
snmp-server community
![]() |
View all Netgear XSM4348CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches snmp-server community This command adds (and names) a new SNMP community. A community name is associated with the switch and with a set of SNMP managers that manage the community with a specified privileged level. The length of the name parameter can be up to 16 case-sensitive characters. Note: Community names in the SNMP Community table must be unique. If multiple entries are made using the same community name, the first entry is kept and processed and all duplicate entries are ignored. Format Mode snmp-server community name Global Config no snmp-server community This command removed a community name from the table. The name parameter is the community name that must be deleted. Format Mode no snmp-server community name Global Config snmp-server community ipaddr This command sets a client IP address for an SNMP community. The SNMP community sends SNMP packets from this address. The address along with the client IP mask value denotes a range of IP addresses from which SNMP clients can use the community to access the device. A value of 0.0.0.0 allows access from any IP address. Otherwise, this value is ANDed with the mask to determine the range of allowed client IP addresses. The name is the applicable community name. Default Format Mode 0.0.0.0 snmp-server community ipaddr ipaddr name Global Config no snmp-server community ipaddr This command sets a client IP address for an SNMP community to 0.0.0.0. The name is the applicable community name. Format Mode no snmp-server community ipaddr name Global Config Management Commands 127 CLI Command Reference Manual
![](/manual_guide/products/netgear-m43008x8f-cli-manual-software-version-12x-6ae8ad6/127.png)