Netgear XSM4348CS CLI Manual Software Version 12.x - Page 169
show openflow con d controller
View all Netgear XSM4348CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Term Definition IP Mode The IP mode that is specified by the openflow ip-mode command. The IP mode can be Auto, Static, or ServicePort IP. Static IP Address The static IP address that is specified by the openflow static-ip command. OpenFlow Variant The OpenFlow protocol variant (mode). The OpenFlow variant can be OpenFlow 1.0 or OpenFlow 1.3. Default Table The hardware table that is used as the target for flows that are installed by an OpenFlow 1.0 controller that is not enhanced to handle multiple hardware tables. Passive Mode The OpenFlow passive mode that is specified by the openflow passive-mode command. Command example: (NETGEAR Switch) #show openflow Administrative Mode Enable Administrative Status Disabled Disable Reason No-Suitable-IP-Interface IP Address None IP Mode Auto Static IP Address 10.1.1.1 OpenFlow Variant OpenFlow 1.0 Default Table layer-2-match Passive Mode Enable Command example: (NETGEAR Switch) #show openflow Administrative Mode Enable Administrative Status Enabled Disable Reason None IP Address 10.27.65.64 IP Mode Auto Static IP Address 10.1.1.1 OpenFlow Variant OpenFlow 1.0 Passive Mode Enable show openflow configured controller This command displays a list of configured OpenFlow controllers. The switch communicates with these controllers only when the OpenFlow variant (mode) is 1.0 or 1.3. Format Mode show openflow configured controller Privileged Exec Management Commands 169 CLI Command Reference Manual