Netgear XSM4348CS CLI Manual Software Version 12.x - Page 312

M4300 Intelligent Edge Series Fully Managed Stackable Switches If hostname is selected: file-name-prefix_hostname_Time_Stamp.bin If hostname is not selected: file-name-prefix_MAC_Address_Time_Stamp.bin If hostname is configured the core file name takes the host name, otherwise the core-file names uses the MAC address when generating a core dump file. The prefix length is 15 characters. Default Format Mode Core exception core-file {file-name-prefix | [hostname] | [time-stamp]} Global Config no exception core-file Use this command to reset the exception core file prefix configuration to its factory default value. The hostname and time-stamp are disabled. Format Mode no exception core-file Global Config exception switch-chip-register Use this command to enable or disable the switch-chip-register dump in case of an exception. The switch-chip-register dump occurs only for the master and not for members. Default Format Mode Disable exception switch-chip-register {enable | disable} Global Config write core Use this command to generate a core dump file on demand. The write core test command is helpful when testing the core dump setup. For example, if the TFTP protocol is configured, write core test communicates with the TFTP server and informs the user if the TFTP server can be contacted. Similarly, if the protocol is configured as nfs, this command mounts and unmounts the file system and informs the user of the status. Note: The write core command reloads the switch which is useful when the device malfunctions, but has not crashed. Utility Commands 312 CLI Command Reference Manual