Netgear XSM4348CS CLI Manual Software Version 12.x - Page 461
dot1x port-control all, dot1x mac-auth-bypass
![]() |
View all Netgear XSM4348CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 461 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches no dot1x port-control This command sets the 802.1X port control mode on the specified port to the default value. Format Mode no dot1x port-control Interface Config dot1x port-control all This command sets the authentication mode to use on all ports. Select the force-unauthorized parameter to specify that the authenticator PAE unconditionally sets the controlled port to unauthorized. Select the force-authorized parameter to specify that the authenticator PAE unconditionally sets the controlled port to authorized. Select the auto parameter to specify that the authenticator PAE sets the controlled port mode to reflect the outcome of the authentication exchanges between the supplicant, authenticator and the authentication server. If the mac-based parameter is specified, then MAC-based dot1x authentication is enabled on the port. Default Format Mode auto dot1x port-control all {force-unauthorized | force-authorized | auto | mac-based} Global Config no dot1x port-control all This command sets the authentication mode on all ports to the default value. Format Mode no dot1x port-control all Global Config dot1x mac-auth-bypass If the 802.1X mode on the interface is mac-based, you can optionally use this command to enable MAC Authentication Bypass (MAB) on an interface. MAB is a supplemental authentication mechanism that allows 802.1X unaware clients - such as printers, fax machines, and some IP phones-to authenticate to the network using the client MAC address as an identifier. Default Format Mode Disabled dot1x mac-auth-bypass Interface Config Switching Commands 461 CLI Command Reference Manual
![](/manual_guide/products/netgear-m43008x8f-cli-manual-software-version-12x-6ae8ad6/461.png)