Netgear XSM4348CS CLI Manual Software Version 12.x - Page 345

M4300 Intelligent Edge Series Fully Managed Stackable Switches Parameter Description High Capacity Alarm High capacity alarm startup alarm that may be sent. Possible values are rising, falling, or Startup Alarm rising-falling. The default is rising-falling. High Capacity Alarm Rising-Threshold Absolute Value Low The lower 32 bits of the absolute value for threshold for the sampled statistic. The range is 0 to 4294967295. The default is 1. High Capacity Alarm Rising-Threshold Absolute Value High The upper 32 bits of the absolute value for threshold for the sampled statistic. The range is 0 to 4294967295. The default is 0. High Capacity Alarm Rising-Threshold Value Status This object indicates the sign of the data for the rising threshold, as defined by the objects hcAlarmRisingThresAbsValueLow and hcAlarmRisingThresAbsValueHigh. Possible values are valueNotAvailable, valuePositive, or valueNegative. The default is valuePositive. High Capacity Alarm Falling-Threshold Absolute Value Low The lower 32 bits of the absolute value for threshold for the sampled statistic. The range is 0 to 4294967295. The default is 1. High Capacity Alarm Falling-Threshold Absolute Value High The upper 32 bits of the absolute value for threshold for the sampled statistic. The range is 0 to 4294967295. The default is 0. High Capacity Alarm Falling-Threshold Value Status This object indicates the sign of the data for the falling threshold, as defined by the objects hcAlarmFallingThresAbsValueLow and hcAlarmFallingThresAbsValueHigh. Possible values are valueNotAvailable, valuePositive, or valueNegative. The default is valuePositive. High Capacity Alarm The index of the eventEntry that is used when a rising threshold is crossed. The range is 1 to Rising Event Index 65535. The default is 1. High Capacity Alarm The index of the eventEntry that is used when a falling threshold is crossed. The range is 1 to Falling Event Index 65535. The default is 2. High Capacity Alarm Failed Attempts The number of times the associated hcAlarmVariable instance was polled on behalf of the hcAlarmEntry (while in the active state) and the value was not available. This object is a 32-bit counter value that is read-only. High Capacity Alarm The owner string associated with the alarm entry. The default is monitorHCAlarm. Owner High Capacity Alarm The type of non-volatile storage configured for this entry. This object is read-only. The default is Storage Type volatile. Command example: (NETGEAR Switch) (Config)# rmon hcalarm 1 ifInOctets.1 30 absolute rising-threshold high 1 low 100 status positive 1 falling-threshold high 1 low 10 status positive startup rising owner myOwner Utility Commands 345 CLI Command Reference Manual