Netgear XSM4348CS CLI Manual Software Version 12.x - Page 473

M4300 Intelligent Edge Series Fully Managed Stackable Switches Term Definition VLAN Assigned Reason The reason the VLAN identified in the VLAN-assigned field has been assigned to the port. Possible values are RADIUS, Unauthenticated VLAN, Guest VLAN, default, and Not Assigned. When the VLAN Assigned Reason is Not Assigned, it means that the port has not been assigned to any VLAN by dot1x. This only valid when the port control mode is not MAC-based. Reauthentication Period The timer used by the authenticator state machine on this port to determine when reauthentication of the supplicant takes place. The value is expressed in seconds and will be in the range of 1 and 65535. Reauthentication Indicates if reauthentication is enabled on this port. Possible values are True and False. Enabled Key Transmission Indicates if the key is transmitted to the supplicant for the specified port. Possible values are True or Enabled False. EAPOL Flood Mode Enabled Indicates whether the EAPOL flood support is enabled on the switch. Possible values are True and False. Control Direction The control direction for the specified port or ports. Possible values are both and in. Maximum Users The maximum number of clients that can get authenticated on the port in the MAC-based dot1x authentication mode. This value is used only when the port control mode is not MAC-based. Unauthenticated VLAN ID Indicates the unauthenticated VLAN configured for this port. This value is valid for the port only when the port control mode is not MAC-based. Session Timeout Indicates the time for which the given session is valid. The time period in seconds is returned by the RADIUS server on authentication of the port. This value is valid for the port only when the port control mode is not MAC-based. Session Termination Action This value indicates the action to be taken once the session timeout expires. Possible values are Default, Radius-Request. If the value is Default, the session is terminated the port goes into unauthorized state. If the value is Radius-Request, then a reauthentication of the client authenticated on the port is performed. This value is valid for the port only when the port control mode is not MAC-based. Command example: (NETGEAR Switch) #show dot1x detail 1/0/3 Port 1/0/1 Protocol Version 1 PAE Capabilities Authenticator Control Mode auto Authenticator PAE State Initialize Backend Authentication State Initialize Quiet Period (secs 60 Transmit Period (secs 30 Guest VLAN ID 0 Guest VLAN Period (secs 90 Supplicant Timeout (secs 30 Server Timeout (secs 30 Maximum Requests 2 Switching Commands 473 CLI Command Reference Manual