Netgear XSM4348CS CLI Manual Software Version 12.x - Page 1074
If no RP Group mapping exist on the router, the following message is displayed
![]() |
View all Netgear XSM4348CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1074 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Term Definition Origin Indicates the mechanism (BSR or static) by which the RP was selected. C-RP Advertisement Interval Indicates the configured C-RP Advertisement interval with which the router acting as a Candidate RP will periodically send the C-RP advertisement messages to the elected BSR. Command example: (NETGEAR) #show ipv6 pim rp mapping 192.168.10.1 RP Address Group Address Group Mask Origin 192.168.10.1 224.1.2.1 255.255.255.0 Static Command example: (NETGEAR) #show ipv6 pim rp mapping RP Address Group Address Group Mask Origin 192.168.10.1 224.1.2.1 255.255.255.0 Static RP Address Group Address Group Mask Origin 192.168.20.1 229.2.0.0 255.255.0.0 Static Command example: (NETGEAR) # show ipv6 pim rp mapping candidate RP Address 192.168.10.1 Group Address 224.1.2.1 Group Mask 255.255.0.0 Origin BSR C-RP Advertisement Interval (secs)......... 60 Next Candidate RP Advertisement (hh:mm:ss). 00:00:15 Command example: If no RP Group mapping exist on the router, the following message is displayed: No RP-Group mappings exist on this router. IPv6 Multicast Commands 1074 CLI Command Reference Manual
![](/manual_guide/products/netgear-m43008x8f-cli-manual-software-version-12x-6ae8ad6/1074.png)