Netgear XSM4348CS CLI Manual Software Version 12.x - Page 457

M4300 Intelligent Edge Series Fully Managed Stackable Switches Port-Based Network Access Control Commands This section describes the commands you use to configure port-based network access control (IEEE 802.1X). Port-based network access control allows you to permit access to network services only to and devices that are authorized and authenticated. aaa authentication dot1x default Use this command to configure the authentication methods for port-based access to the switch. The additional methods of authentication are used only if the previous method returns an error, not if there is an authentication failure. The possible methods are as follows: • ias. Uses the internal authentication server users database for authentication. • local. Uses the local user name database for authentication. • none. Uses no authentication. • radius. Uses the list of all RADIUS servers for authentication. You can configure one method at the time. Format Mode aaa authentication dot1x default {ias | local | none | radius} Global Config Command example: (NETGEAR Switch) # (NETGEAR Switch) #configure (NETGEAR Switch) (Config)#aaa authentication dot1x default ias (NETGEAR Switch) (Config)#aaa authentication dot1x default local clear dot1x statistics This command resets the 802.1X statistics for the specified port or for all ports. Format Mode clear dot1x statistics {unit/slot/port | all} Privileged EXEC Switching Commands 457 CLI Command Reference Manual