Netgear XSM4348CS CLI Manual Software Version 12.x - Page 93
Access Commands
View all Netgear XSM4348CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Term Definition Maximum Allowable HTTP The number of allowable un-secure http sessions. Sessions HTTP Session Hard Timeout The hard time-out for un-secure http sessions in hours. HTTP Session Soft Timeout The soft time-out for un-secure http sessions in minutes. HTTP Mode (Secure) The secure HTTP server administrative mode. Secure Port The secure HTTP server port number. Secure Protocol Level(s) The protocol level may be SSL3 or TSL 1.2. Maximum Allowable HTTPS The number of allowable secure http sessions. Sessions HTTPS Session Hard Timeout The hard time-out for secure http sessions in hours. HTTPS Session Soft Timeout The soft time-out for secure http sessions in minutes. Certificate Present Indicates whether the secure-server certificate files are present on the device. Certificate Generation in Progress Indicates whether certificate generation is currently in progress. Access Commands Use the commands in this section to close remote connections or to view information about connections to the system. disconnect Use the disconnect command to close HTTP, HTTPS, Telnet or SSH sessions. Use all to close all active sessions, or use session-id to specify the session ID to close. To view the possible values for session-id, use the show loginsession command. Format Mode disconnect {session_id | all} Privileged EXEC Management Commands 93 CLI Command Reference Manual