Netgear XSM4348CS CLI Manual Software Version 12.x - Page 746
show dampening interface, show interface dampening
![]() |
View all Netgear XSM4348CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 746 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Parameter Half-life period Reuse Threshold Suppress Threshold Max Suppress Time Restart Penalty Description The number of seconds it takes for the penalty to reduce by half. The configurable range is 1-30 seconds. Default value is 5 seconds. The value of the penalty at which the dampened interface is restored. The configurable range is 1-20,000. Default value is 1000. The value of the penalty at which the interface is dampened. The configurable range is 1-20,000. Default value is 2000. The maximum amount of time (in seconds) an interface can be in suppressed state after it stops flapping. The configurable range is 1-255 seconds. The default value is four times of half-life period. If half-period value is allowed to default, the maximum suppress time defaults to 20 seconds. Penalty applied to the interface after the device reloads. The configurable range is 1-20,000. Default value is 2000. no dampening This command disables IP event dampening on a routing interface. Format Mode no dampening Interface Config show dampening interface This command summarizes the number of interfaces configured with dampening and the number of interfaces being suppressed. Format Mode show dampening interface Privileged EXEC Command example: (NETGEAR Switch)# show dampening interface 2 interfaces are configured with dampening. 1 interface is being suppressed. show interface dampening This command displays the status and configured parameters of the interfaces configured with dampening. Format Mode show interface dampening Privileged EXEC Routing Commands 746 CLI Command Reference Manual
![](/manual_guide/products/netgear-m43008x8f-cli-manual-software-version-12x-6ae8ad6/746.png)